Respro offers a wide variety of respiratory protection and gas detection options in order to meet the needs of our customers. From the well established Dräger Breathing Apparatus to Dräger Tubes and new developments in sensor technology for both portable and stationary gas detection systems. Respro provides equipment that warns you of dangerous substances in your environment and provides with the means to protect yourself.
For short-term measurements more than 160 Dräger-Tubes are available to measure the so-called spot concentrations of specific gases. A wide range of different gases and vapours can be detected and measured, e.g.: Determining and measuring concentration peaks, Measuring personal exposure in the inhalation area, Detecting leaks in pipelines, gas installations etc., and Air analysis in sewers, shafts and confined spaces
The Dräger PSS® 5000 SCBA is a new generation high performance breathing apparatus for the professional firefighter. Combining advanced ergonomics with a wide range of configurable options the Dräger PSS® 5000 provides the user with the comfort and versatility to meet the demands of first responders whenever breathing protection is required.
The Dräger PSS® 7000 compressed air breathing apparatus is designed for professional use when working where smoke or toxic gases are present. Weight is concentrated on the hips, which is proven to reduce backstrain, stress and fatigue. The harness has shoulder padding and an optional waist pad which provides extra comfort. The PSS 7000 can be used with either a standard gauge or the DrägerMan Bodyguard® 7000 - an innovative, fully electronic monitoring unit combining a host of monitoring and warning devices into a single instrument.
The Dräger X-plore® 6300 is designed for use by professionals in industry, and meets the highest demands for reliability, fit and comfort. Together with the respiratory filters from Dräger's comprehensive X-plore® Rd40 filter range, it has proven suitable for a wide range of different application
Constant Flow Emergency Escape Breathing Apparatus. Allows safe, effective and uncomplicated escape from hazardous environments with minimal user training. It uses a simple fail-safe pressure reducer, giving a consistent air flow rate at all cylinder pressures, while a combined diffuser. The air hood neck seal is ozone resistant ensuring seal integrity whenever the unit is used. and exhalation valve give an excellent air supply to the streamlined hood. The Saver CF has a very low cost of ownership - with no mandatory service for 10 years. Approved to EN 1146
Positive Pressure Emergency Escape Breathing Apparatus. Designed to provide safe and unhampered escape from hazardous environments where breathing has become difficult or endangered. Proven pneumatics give very low breathing resistance and a consistent air flow rate at all cylinder pressures. The unit comes equipped with the proven Panorama Nova facemask which gives low exhalation resistance, a close and comfortable fit and a self-demisting visor for clear vision. The Saver PP has a very low cost of ownership - with no mandatory service for 10 years. Approved to EN 402
The Dräger REGARD-1 is a standalone, self contained single channel control system for the detection of Toxic, Oxygen and Ex hazards. The control system is fully configurable for a single input from either a 4 to 20 mA transmitter or a Dräger Polytron SE Ex measuring head.
The Dräger REGARD® 3900 is a standalone, self contained control system for the detection of Toxic, Oxygen and Ex hazards. The control system is fully configurable between 1 and 16 channels, depending upon the type and quantity of input/output boards installed.
Faster response – higher accuracy – greater stability – longer life. Dräger electrochemical sensors offer all these benefits. The robust and long-life sensors are used for the selective measurement of the smallest concentrations of toxic gases and oxygen in ambient air.
The Dräger Polytron® 3000 is an intrinsically safe gas detector for the continuous monitoring of more than 60 toxic gases and oxygen in ambient air. It is part of a new generation of gas detectors developed on a modular platform. Communication to the central control system is done via a 4 to 20 mA signal.
The Microprocessor-based transmitter can be equipped with various electrochemical DrägerSensors to easily detect oxygen and various toxic gases in ambient air. In addition, the Polytron® 5100 can be integrated into your facility control and safety system, thus providing additional diagnostic functions.
Quick, reliable and cost-effective detection of combustible gases and vapours in ambient air: the microprocessor-based transmitter is the result of more than 40 years of experience in measurement technology. In addition, the CatEx sensor of the Polytron® 5200 DD can be replaced with a more poison-resistant IR sensor, upgrading the Polytron® 5200 DD to an IR device (Polytron® 5310)
Quick, reliable and cost-effective detection of combustible gases and vapors in ambient air: the microprocessor-based Dräger Polytron® 5310 transmitter is the result of more than 40 years of experience in measurement technology and contains a durable, poison-resistant IR sensor.
Quick, reliable and cost-effective detection of combustible gases and vapors in ambient air: the microprocessor-based transmitter is the result of more than 40 years of experience in measurement technology and contains a new, innovative IR sensor with drift-free optics. These optics are extremely resistant against deposits and insects in the beam.
Quick, reliable and cost-effective detection of carbon dioxide in ambient air: the microprocessor-based Polytron® 5720 transmitter is the result of more than 40 years of experience in measurement technology and contains a new, innovative IR sensor with drift-free optics. These optics are extremely resistant against deposits and insects in the beam.
The Dräger Polytron® 7000 is a gas detector satisfy all toxic and oxygen measurement applications on a single platform. It is meeting the requirements of the compliance market as well as the high specification requirements of customised solutions.
The Polytron® 8100 EC is Dräger’s top of the line explosion proof transmitter for the detection of toxic gases or oxygen. It uses a high performance plug and play electrochemical DrägerSensor® to detect a specific gas. Besides a 3 wire 4 to 20 mA analog output with relays, it also offers Modbus and Fieldbus protocol making it compatible with most control systems.
Quick, reliable and cost-effective detection of combustible gases and vapours in the ambient air: the microprocessor-based transmitter is the result of more than 40 years of experience in measurement technology. In addition, the Polytron® 8200 can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.
Quick, reliable and cost-effective detection of combustible gases and vapours in the ambient air: The Dräger Polytron® 8310, which contains a durable, poison-resistant IR sensor, can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.
Quick and reliable detection of combustible gases and vapours in the ambient air: the microprocessor-based Polytron® 8700 transmitter, which contains a new, innovative IR sensor with drift-free and resistant optics, can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.
Quick and reliable detection of carbon dioxide in the ambient air: the microprocessor-based Polytron® 8720 transmitter, which contains a new, innovative IR sensor with drift-free optics, can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.
The Dräger Flame 3000 is an imaging based explosion proof flame detector. This visual flame detection system uses digital image processing and advanced algorithms to process and interpret flame characteristics. This principle offers an extended field of view and fewer false alarms.
The Dräger Flame 5000 is an imaging based explosion proof flame detector. This visual flame detection system uses digital image processing and advanced algorithms to process and interpret flame characteristics. This principle offers an extended field of view and fewer false alarms. Each detector is equipped with a colour CCTV camera.
The transmitter Dräger PEX 3000 detects flammable gases and vapors in concentrations below their Lower Explosion Limit. Its DD-sensor provides a very long-term stable measuring signal and responds to gas in only a few seconds.
The Dräger PIR 3000 is an explosion proof infrared gas detector for continuous monitoring of combustible gases and vapors. Based on a stainless steel SS 316 enclosure as well as on a good measuring performance, this transmitter offers an excellent price-performance-ratio.
The Dräger PIR 7000 is an explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours. With its stainless steel SS 316L enclosure and drift-free optics this detector is built for the harshest industrial environments, e.g. offshore installations.
The Dräger Polytron® Pulsar is the latest infrared technology in open path gas detection, capable of detecting a wide range of gaseous hydrocarbons. These include the alkane series from methane to hexane, propylene, methanol, ethanol and ethylene.
Truly wireless, the GasSecure GS01 combines single-beam triple-wavelength infrared (IR) technology with extremely low power consumption, to provide fast hydrocarbon gas detection in the most demanding and hazardous of environments. The GS01 helps create value for the customer through reliable infrared operation, calibration free design.
As entry level model of the successful Dräger Alcotest® 6510 the Dräger Alcotest® 5510 offers professional users precise and quick breath alcohol analysis in a user-friendly and compact form. Thanks to its wide range of possible configurations, the handheld instrument can be easily adapted to meet different international regulations and guidelines.
Keeping the roads safe and free of impaired drivers is an unpredictable and high stress job. Dräger designed the Alcotest® 6820 handheld breathalyser specifically for the needs of law enforcement officers. It's easy to use ad provides fast, reliable results in the toughest environments you face when every second matters.
Use the Dräger DrugCheck® 3000 to find out within minutes if a person recently consumed certain drugs. The compact and quick oral fluid based drug test yields reliable results affordably and easily. The device does not require electricity and can be used anywhere.
The Dräger DrugTest® 5000 system consists of two main components: the DrugTest 5000 Test Kits and the DrugTest 5000 Analyser. It is a fast and highly accurate system for testing saliva samples for substances such as amphetamines, designer amphetamines, opiates, cocaine and its metabolites, benzodiazepines, cannabinoids, ketamine or methadone.
The Dräger Interlock® 7000 is an alcohol interlock device which prevents a person under the influence of alcohol from starting the vehicle. The Interlock® 7000 has a quick start-up time. Additionally, the device can be equipped with a camera and/or a GPRS module, according to the specific customer requirements.
The Dräger Mobile Printer prints breath alcohol and drug test measurement results directly on the spot.
The Dräger HPS® 7000 firefighter’s helmet is in a class of its own, thanks to its innovative, sporty and dynamic design, ergonomic fit and components which make it a multifunctional system solution. It provides optimum protection during every operation.
Dräger PARAT® Escape hoods were developed in cooperation with users – always with the focus on the fastest escape. Optimised operation and wearing comfort, a robust housing and tested filters guarantee that the wearer of the Dräger PARAT® is protected from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.
The Dräger FPS®-COM 7000 provides hands-free communication for all wearers of respiratory protection devices during a mission. Excellent voice quality is achieved by removing interfering noises.
Ideally suited for personal monitoring applications, the Dräger Pac® 5500 provides quick detection of carbon monoxide, hydrogen sulfide or oxygen. Accurate, reliable and easy to use, this small, ergonomic instrument has no lifetime limitation.
Small and robust, ergonomic and intuitive, economic and powerful – the Dräger Pac® 7000 is tailor-made for personal monitoring at the workplace. Featuring the latest sensor technology, this innovative single gas detector is equipped with a wide range of functions and is suitable for many different applications in day-to-day industrial settings.
The Dräger X-am 2500® was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, NO2, SO2 and H2S. Reliable and fully mature measuring technology, durable sensors and easy handling guarantee a high degree of safety with extremely low operating costs.
The Dräger X-am® 5000 belongs to a new generation of gas detectors, developed especially for personal monitoring applications. This 1 to 5-gas detector reliably measures combustible gases and vapors as well as O2 and harmful concentrations of O3, Cl2, CO, CO H2-CP, CO2, H2, H2S, HCN, NH3, NO, NO2, PH3, SO2, COCl2, organic vapors, Odorant and Amine.
For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Dräger X-am® 5100 portable single-gas detector guarantees that you use the safest methods possible for handling HF, HCl, H2O2 or hydrazine - thanks to proven Dräger sensor technology and a device design which is perfectly customised to reactive gases.
Featuring an ergonomic design and innovative infrared sensor technology, the Dräger X-am® 5600 is the smallest gas detection instrument for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible and toxic gases and vapors as well as oxygen.
Dräger X-am® 7000 is the innovative solution for the simultaneous and continuous measurement of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. It is the ideal companion in a variety of applications where the reliable detection of oxygen, toxic and combustible gases and vapors is necessary.
State-of-the-art area monitoring – the Dräger X-zone® 5500 in combination with the Dräger X-am® 5000, 5100 or 5600 gas detection instruments can be used for the measurement of up to six gases and extends the portable gas detection technology to a unique system with many applications.